If your washer is not working, take the following steps:
- Make sure the power cord/cable is plugged into the working electrical wall socket
- Check the circuit breakers or fuse of the fuse box and reset if necessary.
- Select the cycle you want by turning the control knob, closing the lid and pulling out the knob.
- If the washer has feather touch buttons, be sure to press them firmly.
- The washer should start.
- Ensure that the lid is closed for the washer to stir and/or spin safely.
- The lid switch could be malfunctioning which prevents the washer from spinning while the lid is open. In such a case, the built-in brakes are applied to stop the washer’s operations until the lid switch is repaired/replaced.