- Check that the washer is receiving a power supply and that the power cord/cable is plugged into the socket.
- Check the circuit breakers or fuse of the fuse box and reset it if necessary.
- Select the cycle you want and turn the control knob, close the lid and pull out the knob.
- Check the inlet hose that is connected from your water tap to the washer and straighten it if required.
- If the problem persists, switch off the tap and disconnect the hose.
- Clean the hose filter screen to remove any dirt/foreign material/blockage that might be blocking the water line.
- Replace the filter screen, reconnect the hose, turn the tap into the ‘on’ position and close the lid to start a new cycle.